The production process of the color box packaging factory:

1. Color box printing plan

The color box printing plan is based on the theme of the design. The printing method, the layout size, the theme of the printed matter, the number of paper or printing colors, and even the selection of the relevant processing manufacturers, etc., must be carefully reviewed. The process went online smoothly and finished beautifully.

2. Design and production

Copywriting, design, layout planning, etc. are carried out according to the color box brush plan. It is the pre-work procedure for the finished manuscript. At the same time, photography and illustration drawing should also be arranged. Elements are specified.

3. The finished draft

According to the first draft of the layout plan, arrange its copy, photos and illustrations, correct position and correct color marking, etc. on the finished manuscript in sequence or process the complete manuscript in the form of electronic manuscript, and clearly indicate the special requirements of plate making. This is the pre-work of plate making.

4. Production output and plate making operations

After the finished manuscript enters the plate making, the picture is scanned and separated by an electronic color separation machine, the text and lines are photographed with a black and white camera, and the correct number of screens is punched out. , and then print out a color proof and send it back to the designer for proofreading. If it is processed electronically, it needs to be submitted to the output center for output negatives. Be sure to fill in the output work sheet or instruction sheet in detail, clearly indicating the number of lines to be output, the number of pages in color and monochrome, whether there is word creation, and the number of specifications. , to avoid communication errors and cause unnecessary losses.

5. Proofreading homework

This is the last step before printing. It is to check whether the color proofing conforms to the procedures indicated on the finished manuscript. When there is color correction and other corrections, be sure to use red pen to write specific and easy-to-understand text descriptions or position outlines. , correctly communicated to the plate making personnel, so as to avoid unnecessary losses.

6. Printing operations

The corrected four-color screen is turned into a printing plate, sent to the printing machine, and the official printing begins. If you want to get an ideal printed product on a color box printing machine, you must first understand the printing factors. Because there are many variable factors, it has a huge impact on the printing quality. Therefore, you must have a certain and full understanding of these factors.

7. Binding and processing operations

Propaganda brochures, catalogs, booklets, etc., commonly known as DM, are the last procedure of color box printing, which is binding processing. Generally, the most commonly used single-sheet flat type is cutting, crimping, folding, etc. As for binding, It depends on the number of pages, the type of paper, the fineness, and the way and purpose of use.

    The above is the production process of the color box packaging factory, do you all understand?